For the protection of recirculating cooling and heating water systems, LIQUIDEWT cooling water treatment is a liquid, multi-functional corrosion inhibitor with a nitrite basis. The LIQUIDEWT treatment is a great one for the primary and secondary cooling water of diesel engines.

A very effective, non-chlorinated solvent called DREW ELECTRIC 2000 motor and parts cleaner is made for cleaning electric parts that need to be penetrated deeply and vaporized at a controlled rate. It can be used on huge motors, generators, and electrical equipment as well as smaller equipment, and it is inexpensive to use. High dielectric strength and low non-volatile residue values are characteristics of the cleaner DREW ELECTRIC 2000.

All-volatile, liquid, catalyzed DREWPLEX OX corrosion inhibitor is intended for use in low-, medium-, and high-pressure steam-producing systems. By using DEHA as an oxygen scavenger, the corrosion inhibitor DREWPLEX OX prevents ferrous and non-ferrous corrosion in feedwater, boilers, steam, and condensate lines.

Drew Carbon Remover combines highly active, quickly penetrating solvents with particular detergents and corrosion inhibitors to remove soot, varnish, gummy material, etc. from diesel engine pistons, rings, valves, and other areas where oil combustion fouling occurs, Oil, grease, varnish, and the majority of incomplete combustion byproducts are all dissolved and penetrated through deposits.

DESCALE-IT is a liquid acid used to clean heat exchangers and pipe systems of scale and corrosion deposits. Using DESCALE-IT prevents expensive manual descaling and costly downtime. After the heat exchanger deposits have been removed, the inhibitor in DESCALE-IT stops the base metal from being seriously attacked.

To remove rust and rust stains as well as passivating iron and steel surfaces, AMEROID RSR is a liquid mixture comprising a rust-dissolving acid, an emulsifier, and a passivator. For eliminating rust or rust stains from painted decks, overheads, and bulkheads in pump rooms and engine rooms, AMEROID RSR is advised. All kinds of ferrous metals can be cleaned with it, and it leaves metal surfaces passivated, preventing air corrosion and flash rusting.

A premium blend of solvents, dispersants, surfactants, and detergents called AMERGY 222 fuel oil conditioner is designed to reduce the impacts of a fuel’s inherent instability and/or incompatibility when two or more fuels from various bunker suppliers are merged. Normally suspended and rather stable asphaltenes may precipitate from the fuel during blending and create fuel sludge.