- Black Friday! 35% Off
- Free carbon neutral shipping on US orders
End of Time:
:
:
:
0
0 items
0.00₦
No products in the cart.
On Sale This Week
Puncture-resistant safety boot is a type of footwear designed to protect the wearer’s feet from puncture wounds caused by sharp objects such as nails, screws, and metal shards.
FFFP 3% also known as Film Forming Fluoroprotein Foam is simply film-forming fluoroprotein foam concentrate also known as (FFFP) that contains hydrolyzed protein and preservatives, as well as a blend of fluorinated surfactants for optimum synergy. The fluorochemical blend chosen is successful in lowering the surface tension of water as well as the interfacial tension between water and oil to a level that produces a stable layer on the surface of the fuel, outperforming synthetic-based compounds. Protein in the composition creates a thick visible blanket with excellent burn back resistance.
Add to Wishlist
Add to Wishlist
FFFP 3% also known as Film Forming Fluoroprotein Foam is simply film-forming fluoroprotein foam concentrate also known as (FFFP) that contains hydrolyzed protein and preservatives, as well as a blend of fluorinated surfactants for optimum synergy. The fluorochemical blend chosen is successful in lowering the surface tension of water as well as the interfacial tension between water and oil to a level that produces a stable layer on the surface of the fuel, outperforming synthetic-based compounds. Protein in the composition creates a thick visible blanket with excellent burn back resistance.
Add to Wishlist
Add to Wishlist
AFFF 6% is an aqueous film forming foam concentrate made primarily of fluorocarbon and hydrocarbon surfactants, as well as a variety of preservatives, solvents, and stabilizers. One of the functions of this foam is to create an aqueous covering that cuts off the oxygen supply and swiftly extinguishes the flames.
Add to Wishlist
Add to Wishlist
AFFF 3% is an aqueous film-forming foam concentrate (popularly known as AFFF 3%) made up of fluorocarbon and hydrocarbon surfactants, as well as a variety of preservatives, solvents, and stabilizers. One of the things this foam does is form an aqueous coating that blocks off the oxygen supply and extinguishes the flames quickly.
Add to Wishlist
Add to Wishlist
PPG Sigmaprime 200 is a universal epoxy anticorrosive primer based upon pure epoxy technology, a primer system that is suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds, with excellent anticorrosive properties and water resistance. The surface tolerant primer has excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals, with good abrasion resistance for dedicated areas of application and excellent recoatability.
Add to Wishlist
Add to Wishlist
Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention.
Recommended use: Hempathane Topcoat 55210 is recommended as a finishing coat for protection of structural steel in a severely corrosive atmospheric environment, where colour fastness and gloss retention are required.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
HEMPADUR 15570, is popularly known as the two-part epoxy paint that cures to a strong and extremely corrosion-resistant coating at temps as low as -10°C/14°F, is polyamide-adduct cured. The HEMPADUR 15570, the micaceous Iron Oxide pigment reddish grey 12430 hue is suitable for use on damp steel surfaces and in humid environments. It can also be applied to wet surfaces. Zinc phosphate is present in the hues 21780, a grayish yellow, and 11320, a grey.
Add to Wishlist
Add to Wishlist
Jotun Penguard Primer is a two component polyamide cured high molecular weight epoxy coating designed as a primer for new construction. It can be used as a primer as a part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop primed steel and thermally sprayed zinc substrates.
Add to Wishlist
Add to Wishlist
This is a two component, polyamide cured, high molecular weight epoxy coating. It has a semi-gloss finish with fair gloss retention. Can be used as an anti-corrosive primer, finish coat or as a single coat system in atmospheric environments or as a final coat in an immersed environment. To be used as a topcoat in atmospheric and immersed environments.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at subzero surface temperatures.
Add to Wishlist
Add to Wishlist
Product categories
All Categories
Need Help?
09129659392 / 08144536538
Monday – Friday: 9:00-20:00
Saturady: 11:00 – 15:00
Customer Service
Copyright 2024 © Morven Industrial All right reserved. By Sort Odds Global Solutions