PPG Sigmacover 280

Description

1. PPG SigmaCover 280 is a universal epoxy anticorrosive primer based upon pure epoxy technology. It is suitable for ballast tanks, decks, and topside, superstructure, hull and cargo oil tanks. SigmaCover 280 is used in protective coating systems for steel and non-ferrous metals, curing at temperatures down to 5°C (41°F), and can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy and two-component polyurethane coatings.PRINCIPAL CHARACTERISTICS
   • Universal epoxy primer system suitable for Ballast Tanks, Decks, Topside, Superstructure, Hull and Cargo Oil Tanks.
   • General-purpose epoxy primer in protective coating systems for steel and non-ferrous metals.
   • Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals.
   • Good flow and wetting properties.
   • Good water and corrosion resistance.
   • Cures at temperatures down to 5°C (41°F).
   • Suitable for touching up of weld seams and damages of epoxy coatings during construction.
   • Can be overcoated with most alkyd-, chlorinated rubber-, vinyl-, epoxy- and two-component polyurethane coatings.
   • Suitable on wet blast cleaned substrates (damp or dry).
   • Compatible with well-designed cathodic protection systems.

   Sigmacover 280 is avaialble in different colours.

   INSTRUCTIONS FOR USE

   Mixing ratio by volume: base to hardener 80:20 (4:1) • The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity • Adding too much thinner results in reduced sag resistance and slower cure • Thinner should be added after mixing the component.

   Contact us at Morven Industrial Ltd to place an order for PPG Sigmacover 280. Click on this link to download the technical data sheet of PPG Sigmacover 280. Our technical team is available to provide every technical support needed.