JOTAMASTIC 87

Description

This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, high solids, high build product. Specially designed for areas where optimum surface preparation is not possible or desired. Provides long lasting protection in environments with high corrosivity. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at subzero surface temperatures.

TYPICAL USE

General: Primarily designed for maintenance and repair.

Marine: Outside hulls, exterior and interior areas, including water ballast tanks.

Protective: Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.

SURFACE PREPARATION

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination

APPLICATION METHODS

The product can be applied by

Spray: Use airless spray.

Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.

Roller: May be used for small areas. Not recommended for the first primer coat. Care must be taken to achieve the specified dry film thickness.

STORAGE

The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.

Cleaning solvent Thinner: Jotun Thinner No. 17

Contact us at MORVEN INDUSTRIAL LTD to place an order for JOTUN JOTAMASTIC 87. Click on this link to download the technical data sheet of JOTUN JOTAMASTIC 87. Our technical team is available to provide every technical support needed.