Hempathane Topcoat 55210

Description

Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention.

Recommended use:  Hempathane Topcoat 55210 is recommended as a finishing coat for protection of structural steel in a severely corrosive atmospheric environment, where colour fastness and gloss retention are required.

Service temperature: – Maximum, dry exposure only: 120°C [248°F].

Features – For a severely corrosive atmospheric environment. – The minimum temperature for curing is -10°C [14°F]. – Glossy with good gloss and colour retention.

Surface preparation

Cleanliness – According to Hempel’s Specification.

New build: – According to Hempel’s Specification.

Maintenance and Repair – According to Hempel’s Specification.

Application conditions – To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C [5°F] above the dew point. – Surface temperature must be above -10°C [14°F] during application and curing. – The film formation may be adversely affected by light rain, high humidity and/or condensation during application and the following interval after application: “10 hours, 20°C/68°F”

Relative Humidity: – Relative humidity must be below 85% during curing. Application remarks – Two coats.

Contact us at Morven Industrial Ltd to place an order for Hempathane Topcoat 55210. Click on this link to download the technical data sheet of Hempathane Topcoat 55210. Our technical team is available to provide every technical support needed.