Description

HEMPALIN PRIMER 12050 is a relatively quick-drying alkyd primer containing zinc phosphate. It is a general purpose primer for HEMPALIN systems for protection of steel in mild to medium atmospheric corrosive environments.

Features & Benefits

• For professional use only
• Quick-drying alkyd primer containing zinc phosphate
• Complies with EU Directive 2004/42/EC, subcategory i
• EC-type examined as a low flame spread material when used as part of a predefined paint system
• For newbuild and maintenance/repair
• Easy to apply with brush and roller. Can also be applied with spray. Nozzle pressure: 150 bar [2200 psi]
  Nozzle orifice: 0.018

SURFACE PREPARATION:

 New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2 (ISO 8501-1:2007) is recommended. For temporary protection, if required, use a suitable shopprimer. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPALIN PRIMER 12050. Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Touch up bare spots to full film thickness.

APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying.

Contact us at Morven Industrial Ltd to place an order for Hempalin primer 12050. Click on this link to download the technical data sheet of Hempalin primer 12050. Our technical team is available to provide every technical support needed.