Interlac 665

Description

Interlac 665 is a gloss alkyd one-pack treatment. Interlac 665 is applied on surfaces above the waterline, as an easily kept cosmetic finish layer. Also, it is appropriate for use at new construction, maintenance and repair, or onboard maintenance. Only use Interlac 665 over the advised anticorrosive coatings. The vessel area, existing coatings, coating condition, and application position will all influence the primer that should be used. Before using this one-pack coating, it should always be thoroughly mixed with a power agitator.

Properties

• Colour: CLB000-White, CLD260-Intl. Orange, CLK724-Storm Grey, CLL274-Red, CLL549-Signal Green, CLY999-Black; and a wide range of colours.
• Finish/Sheen: High Gloss
• Volume Solids: 48% ±3% (ISO 3233:1998)
• Method of Application: Airless Spray, Brush, Conventional Spray, Roller

Follow the Worldwide Marine Guidelines when using. All surfaces that will be coated must be clear of contamination, dry, and clean. In line with SSPC-SP1 solvent cleaning, high-pressure fresh water wash or fresh water wash, as applicable, and remove all oil or grease, soluble contaminants, and other foreign matter.

In regions that are submerged, Interlac 665 should not be used. Spray outside when it’s nice. For covered surfaces, it must be at least 3°C above the dew point. If not explicitly stated otherwise, bring the material to a temperature between 21 and 27 °C before mixing and applying it. Unmixed materials ought to be stored safely in closed receptacles.

The use of this product must adhere to all applicable national Health, Safety, and Environmental standards and laws in all work involving its application. To keep solvent vapour concentrations within safe ranges and to safeguard against toxic or oxygen-deficient hazards, adequate ventilation and safety measures must be provided during application and drying. Avoid skin and eye contact by taking safety measures. Application techniques and the workplace environment have an impact on the actual safety measures.

The provision of the best engineering and specialty paint products at the most affordable prices is a top priority for Morven Industrial Limited. For all of your engineering requirements, Morven Industrial Limited is the best company to work with. We use high-end brands for the supply of our products. Reach out to us right away. Click on this link to download the technical data sheet of Interlac 665.